By Bruno Venichand, J. Perry & Sons — Florida CGC1540699
Exterior stone veneer siding in Florida costs $38–$65 per sq ft installed over CBS block or stucco, which puts a typical front-elevation accent of 200–400 sq ft at $13,000–$23,000 and a full front facade of 800–1,200 sq ft at $38,000–$63,000. Manufactured ledger panels sit at the low end; full-bed natural stone, coral stone and cut limestone at the top. This guide from J. Perry & Sons stone veneer installation gives the installed ranges we quote in Broward and Palm Beach and what moves a job within them.
Exterior stone veneer cost per square foot by product
| Stone veneer product | Installed per sq ft | 300 sq ft front accent | 1,000 sq ft facade |
|---|---|---|---|
| Manufactured stone (concrete-based ledger or fieldstone) | $27–$37 | $8,000–$11,000 | $27,000–$37,000 |
| Natural thin-veneer ledger panel (quartzite, slate) | $34–$46 | $10,000–$14,000 | $34,000–$46,000 |
| Cut limestone, travertine or marble panels | $40–$55 | $12,000–$17,000 | $40,000–$55,000 |
| Coral stone / keystone | $45–$65 | $14,000–$19,000 | $45,000–$63,000 |
| Full-bed natural fieldstone or ledgestone, loose-laid | $46–$65 | $14,000–$19,000 | $46,000–$63,000 |
| Outside corners, any product | +$12–$17 per linear foot |
Ranges include prep of the existing wall, lath and scratch coat where needed, the stone, mortar, corners, installation, and sealer on natural stone. Sills, caps, window and door trim pieces, electrical relocation and any stucco repair found under the old finish are separate.
What an exterior stone veneer quote is made of
Free Estimate
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com with project photos, the city, approximate dimensions, and material selections.
- Wall prep. Over sound stucco: pressure wash, then either a bonding scratch coat or metal lath fastened through to the block, then a scratch coat. Over bare block: scratch coat directly. Over wood framing: weather-resistive barrier, lath, scratch coat. Prep is $4.50–$7 per sq ft of the total.
- The stone. Material is $9–$14 per sq ft for manufactured, $14–$23 for natural thin veneer, $22–$34 for coral stone and cut limestone. Corners are sold by the linear foot.
- Layout and setting. Corners first, then field, bottom up, in a polymer-modified veneer mortar. Grouted joints are tooled; dry-stack is fitted tight.
- Terminations. Where stone stops, it needs a finished edge: a sill at the bottom, a cap or trim at the top, and a return or corner at the sides. A stone band that just stops in the middle of a stucco wall looks wrong and lets water in.
- Flashing and weeps. Stone over framing needs a weep screed at the base and flashing at every window and door head. Over block it needs a drip at the top edge.
- Sealer. A penetrating sealer on natural stone, especially where sprinklers or salt air reach it.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Send a photo of the elevation and a rough width and height of the area and we'll give you a range the same day.
Accent, wainscot or full facade
Most South Florida stone jobs are accents: the garage wall, the entry tower, a band under the windows, or the columns. An accent of 200–400 sq ft changes the look of the house for $13,000–$23,000.
A wainscot (stone from grade to the window sill around the front) runs 150–300 sq ft on most homes and needs a sill cap along its whole length, which adds $30–$46 per linear foot.
A full facade is the biggest ticket and the one where the product choice matters most, since 1,000 sq ft at $22 and at $55 is a $33,000 difference. See the exterior stone veneer cladding guide for design options, and stone veneer vs stucco and paint for how the costs compare over time.
South Florida conditions that affect exterior stone
Rain and wind. Summer storms drive water sideways. Stone veneer is not a waterproofing layer; the scratch coat, flashing and drip edges are. We detail every top edge and window head so water sheds instead of sitting behind the stone.
Salt air. East of US-1, natural stone gets a penetrating sealer and manufactured stone a breathable sealer; fasteners for lath are stainless or hot-dipped.
Sprinklers. Irrigation hitting the bottom courses twice a day causes most of the efflorescence and staining we are asked to fix. Redirect heads before the stone goes on.
Sun and heat. Dark stone on a west wall gets hot and expands; a movement joint every 15–20 feet and at floor lines on two-story walls is standard.
Hurricanes. Adhered stone veneer over block, installed to the manufacturer's spec, is a bonded masonry finish. Loose caps and sills are the parts that need to be mortared and pinned.
HOA and permits. A change to the front elevation needs HOA approval in nearly every Broward and Palm Beach community; we prepare the drawing and sample for the owner's submittal. Veneer over an existing wall is a finish and does not typically require a permit; lath over framing, structural repairs or new columns can, and we pull it.
Timeline for exterior stone veneer
- 200–400 sq ft accent: 4–7 working days
- Wainscot around the front with sill cap: 5–8 working days
- 1,000 sq ft facade: 2–4 weeks
- Add 2–4 weeks for HOA approval before the start
The house stays occupied; the work is outside and the only interior impact is noise.
How to keep exterior stone veneer costs in range
- Put stone where it is seen: entry, garage wall, columns. A 300 sq ft accent reads as a stone house from the street.
- Keep stone off areas with a lot of windows; cuts and returns at every opening add labor.
- Choose a natural ledger panel over loose-laid stone if you want natural at a panel price.
- Order corners and field stone from one lot with 10% overage.
- Do the columns, a stucco repair and a repaint in the same job; the crew and the staging are already there.
Exterior stone veneer by city
- Stone veneer in Parkland
- Stone veneer in Southwest Ranches
- Stone veneer in Weston
- Stone veneer in Davie
- Stone veneer in Boca Raton
- Stone veneer in Wellington
- Stone veneer in Jupiter
- Stone veneer in Fort Lauderdale
Related guides: Exterior stone veneer cladding · Stone veneer vs stucco and paint · Stone veneer over stucco and CBS block
Exterior stone veneer siding cost — FAQ
How much does stone veneer siding cost per square foot in Florida? $27–$37 installed for manufactured stone, $38–$55 for natural thin veneer and cut stone panels, and $45–$65 for coral stone and full-bed natural stone, over block or stucco.
How much does it cost to put stone on the front of a house? A 200–400 sq ft accent is $13,000–$23,000; a full 1,000 sq ft front facade is $38,000–$63,000 depending on the stone.
Can stone veneer go over stucco? Yes, when the stucco is sound and bonded. It is washed, lathed or scratch-coated, and the stone is set over it. Hollow or cracked stucco is repaired first.
Does exterior stone veneer need to be sealed in Florida? Natural stone, yes, with a penetrating sealer, re-applied every few years near salt air or sprinklers. Manufactured stone benefits from a breathable sealer but does not require one.
How do I get an exact price? Call (561) 556-7509 or email photos and rough dimensions to jperrysonsgc@gmail.com. A written estimate is typically ready within 24–48 hours after a site review and scope confirmation.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Licensed Florida general contractor CGC1540699. Serving Broward and Palm Beach counties.
Free Estimate
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com with project photos, the city, approximate dimensions, and material selections.
START YOUR
PROJECT
Ready to transform your space? Tell us about your project and we'll schedule a complimentary consultation with our design team.