J. Perry & Sons handles commercial countertop installation and slab work in Broward, Palm Beach and Miami-Dade for GCs, hotel and multifamily owners, property managers and medical and office tenants. We template, fabricate through our shop partners and install quartz and natural stone tops, restroom vanity tops, break-room counters and reception desk tops and cladding, and we set large porcelain slabs on walls in lobbies, restrooms and showers. It is the commercial side of our stone slab installation work. Quartz countertop installation runs $95–$150 per sq ft supplied and installed.
Commercial Countertop and Slab Cost in South Florida: $95–$150 per sq ft for quartz
| Scope | Unit | Installed range |
|---|---|---|
| Quartz countertop, fabricated and installed, eased or mitered edge | per sq ft | $95–$150 |
| Quartzite or natural stone countertop | per sq ft | $130–$200 |
| Restroom or hotel vanity top swap, single top | each | $1,500–$3,500 |
| Porcelain slab wall cladding, lobby, restroom or reception | per sq ft of wall | $70–$105 |
| Porcelain slab shower walls, labor only | per shower | $5,500–$9,000 |
| Porcelain slab shower walls, supplied and installed | per shower | $9,500–$16,000 |
| Kitchen or break-room countertop replacement, 45–70 sq ft | per kitchen | $7,750–$13,000 |
Ranges include templating, fabrication, sink and faucet cutouts, edge profile, installation and removal of old tops where noted. Plumbing disconnect and reconnect is coordinated with the plumbing contractor. Mitered waterfalls, book-matched slabs and integrated sinks are priced per piece.
Slab packages we install
Restroom vanity tops. Long multi-sink quartz or solid-surface-look tops on wall brackets or millwork, with undermount sinks, backsplash and side splash, set at ADA height where the plan calls for it. Restroom packages often pair with our commercial renovation crews for the tile and fixtures around them.
Reception desks. Quartz or stone transaction tops, mitered aprons and porcelain slab cladding on desk fronts, coordinated with the millwork shop so the steel and plywood substrate is ready for the stone.
Porcelain slab walls. 5x10 and larger panels at 6 mm and 12 mm on lobby feature walls, elevator lobbies, restroom wet walls and hotel showers. Thin, large and grout-light, they set on a flat, primed substrate with full-coverage mortar and need a crew that handles them on a rack, not by hand.
Hospitality and multifamily slab packages. Hotel bathroom vanities and shower walls, apartment kitchen tops and bathroom vanities repeated across dozens or hundreds of units. We price by unit type from the finish schedule and template floor by floor.
Break rooms and clinics. Quartz counters in break rooms, nurse stations and exam rooms, where stain and chemical resistance matter more than looks.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Send the millwork shop drawings or finish schedule and we will return pricing per unit type within 48 hours.
How we work with GCs and property managers
- Insurance paperwork up front. A COI naming the owner, the hotel or management company and the GC, with the crew list for badge or key access.
- 48-hour bids from shop drawings. We take off sq ft of top, LF of edge and backsplash, and each of cutouts, and price by unit type for repetitive floors.
- Night and phased installs. In open hotels and occupied apartment buildings we template and install by floor or stack, and keep noise to the hours management sets.
- Unit pricing. Per sq ft of slab, per each vanity or shower, per unit type. Added tops come in at the same rates.
- Closeout. Slab and quartz product data, care and sealing sheets, remnant inventory if the owner wants spares, and a signed punch list.
How a commercial slab install runs
- Millwork and substrate check. Cabinets level and fastened, brackets and plywood in place, walls flat for slab cladding.
- Template. Digital or physical template after millwork is set, never from drawings alone.
- Fabrication. Cut, edge and sink cutouts at the shop, seams laid out away from sinks and high-stress corners.
- Delivery and staging. Slabs on A-frames, moved through the building by elevator or crane per the site logistics plan.
- Install. Tops set on silicone and epoxy, seams color-matched; wall slabs set with full-coverage mortar and leveling clips.
- Seal and protect. Natural stone sealed, quartz cleaned, everything covered until the GC's final clean.
Slab work in South Florida buildings: elevators, humidity and codes
Getting a 10 ft slab into a high-rise is often the hardest part of the job. Many South Florida condo and hotel towers have elevators too short for full slabs, so we plan seams, use the freight elevator or hoist, or move cladding to smaller panels before fabrication. Humidity matters too: wall substrates have to be dry and the building air-conditioned before porcelain slab is set, or the mortar cure suffers. Hotel and multifamily owners here also ask for ADA vanity heights and knee clearance in a share of rooms, which changes the bracket layout. Countertop replacement does not usually need a permit; slab walls in showers ride on the bathroom permit. See permits and compliance.
Related slab and commercial services
- Hotel and hospitality tile: guest room baths and public areas.
- Multifamily apartment tile and flooring: unit turnovers and amenity spaces.
- Countertop restoration and polishing: reviving existing stone tops.
- Commercial flooring: the floor that goes with the slab work.
- Commercial tile contractor: lobby, restroom and corridor tile around the slab work.
Workmanship warranty on every job; materials carry the manufacturer's warranty. Terms are in your written contract.
Commercial countertops and slabs by area
- Stone slab installation in Fort Lauderdale
- Stone slab installation in Miami
- Stone slab installation in Miami Beach
- Stone slab installation in Boca Raton
- Stone slab installation in West Palm Beach
- Stone slab installation in Aventura
- Stone slab installation in Delray Beach
- Stone slab installation in Palm Beach Gardens
Planning guides: Quartz countertop cost installed · Porcelain slab wall cost · Porcelain slab shower walls cost · Quartz vs quartzite vs granite
Commercial countertops and slabs — FAQ
What does commercial countertop installation cost? Quartz runs $95–$150 per sq ft fabricated and installed, quartzite and natural stone $130–$200. A single vanity top swap is $1,500–$3,500.
Do you do quartz countertop installation for multifamily turnovers? Yes. We price by unit type from the finish schedule, template floor by floor, and install on the turnover schedule the property manager sets.
Can you clad a reception desk in stone or porcelain slab? Yes. Quartz or stone tops plus porcelain slab on the desk front at $70–$105 per sq ft, coordinated with the millwork shop.
What do porcelain slab shower walls cost for a hotel? $5,500–$9,000 per shower labor-only when the owner supplies slab, $9,500–$16,000 supplied and installed.
How do you get full slabs into a high-rise? We check elevator size and site logistics before fabrication and plan seams or panel sizes to fit, using freight elevators or a hoist where the building allows.
How do I get an exact price? Call (561) 556-7509 or email jperrysonsgc@gmail.com with photos and rough dimensions. A written estimate is typically ready within 24–48 hours after a site review and scope confirmation.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Licensed Florida general contractor CGC1540699. Serving Broward, Palm Beach and Miami-Dade counties.