Stucco & Drywall Finishes in Boynton Beach, FL
Stucco repair, re-stucco and interior drywall for Boynton Beach ranches, villas and 55-plus communities.
Boynton Beach has one of the largest concentrations of 1980s and 1990s villa and 55-plus communities in Palm Beach County, plus a core of 1950s and 1960s block homes near the water. Both are at the point where stucco cracks, base-of-wall failures and dated interiors need attention. J. Perry & Sons provides stucco and drywall finishes throughout the city, with quotes written so an association board can approve them when the exterior is common property. We are a licensed renovation contractor in Boynton Beach and we pull the permit when the scope needs one.
Stucco & Drywall Finishes Cost in Boynton Beach
| Scope | Typical size | Installed range |
|---|---|---|
| Stucco crack or spall repair | 10–50 sf patch area | $8–$18/sf of patch |
| Re-stucco a wall | 200–1,000 sf | $6–$12/sf |
| Smooth finish over existing texture | 300–2,000 sf | $5–$9/sf |
| Reshape a window opening (arch to square, returns after impact windows) | per opening | $900–$2,500 each |
| Drywall, Level 4 finish | 300–2,500 sf | $2.50–$4.50/sf |
| Drop ceiling or soffit | 40–250 sf | $8–$18/sf |
Ranges are 2026 labor and setting materials. Repairs grouped across several units in the same community bring the per-foot cost down for everyone involved.
Free Estimate
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com with project photos, the city, approximate dimensions, and material selections.
Boynton Beach homes and what that means for stucco and drywall finishes
East of I-95, the older part of Boynton is 1950s and 1960s single-story CBS, with a strip of waterfront homes and condos along the Intracoastal. These houses have original cement stucco in sand or dash textures, and the repairs are driven by age and salt: lintel spalling, tie-beam cracks, and bands that have trapped water for sixty years. The eastern streets are in flood zones, so keeping stucco off the slab edge with a weep screed is part of any base repair.
West of I-95 to the Turnpike and beyond, the city is dominated by communities built from the late 1970s through the 1990s: single-story villas, paired and quad units, and detached homes in age-restricted and HOA communities. The stucco is forty-ish years old and the pattern is corner cracking at windows and sliders, stucco at grade damaged by decades of irrigation, and hairline map cracking on the long south and west walls. Because so many of these are villas, the association often owns the exterior, and the repair has to be scoped clearly enough for a board vote and consistent enough to be repeated across the community.
Newer 2000s communities in the far west have two-story CBS with knockdown finishes and arched windows being squared for impact glass, and their committees expect a matched elevation.
Interior work in Boynton tracks the housing: 1980s kitchens being opened, popcorn ceilings skimmed smooth, soffits added for lighting, and drywall patches where sliding doors are replaced. The City of Boynton Beach Development Department issues permits. Matching stucco and drywall repair does not need one; wall removals and opening changes do. Many 55-plus communities require contractor registration and limit work hours, and we take care of that before day one.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Send a photo of the crack, wall or ceiling and we will send a same-day range.
How we do it in Boynton Beach
- Site visit to tap the walls and measure the real repair area; for villas, we confirm which party owns the exterior.
- Written quote with wall footage shown, in a format the association can approve if needed.
- City of Boynton Beach permit filed for wall removals and opening changes; community registration and work-hour agreement completed.
- Failed stucco removed, rusted steel treated, concrete repaired and cured before stucco.
- Scratch, brown and finish coats with cure time; texture matched by sample panel on the wall.
- Interior drywall and ceiling work taped, finished and skimmed smooth where popcorn is removed.
- Final walk and a written workmanship warranty.
Related services in Boynton Beach
- Painting in Boynton Beach
- Kitchen Renovation in Boynton Beach
- Bathroom Renovation in Boynton Beach
- Tile Installation in Boynton Beach
- Flooring Installation in Boynton Beach
- Pavers in Boynton Beach
- Stone Veneer in Boynton Beach
Nearby service areas
- Stucco & Drywall Finishes in Delray Beach
- Stucco & Drywall Finishes in Boca Raton
- Stucco & Drywall Finishes in Wellington
- Stucco & Drywall Finishes in West Palm Beach
- Stucco & Drywall Finishes in Palm Beach Gardens
Planning guides: Stucco Repair Cost per Sq Ft in South Florida · Stucco Crack Repair vs Re-Stucco · Drywall Level 5 Finish Explained
Stucco & Drywall Finishes in Boynton Beach — FAQ
My Boynton Beach villa association says the exterior is theirs. Can you still quote me? Yes. We write the quote so you can submit it to the board, and if the association approves and hires us, the contract is with them. If it is your responsibility under the documents, we contract with you directly.
Does the city need a permit for stucco crack repair? No. Repairing or re-coating existing stucco is not a permit item in Boynton Beach. Changing a window or door opening, or removing an interior wall, is, and we file it.
How long does a repair take in a 55-plus community with limited work hours? Work-hour limits usually add a day or two. A typical crack and spall package takes four to six working days including cure time between coats, then paint after the stucco cures.
Why is the stucco crumbling at the bottom of my wall? Years of sprinkler water against the base. We cut it back above the damage, install a weep screed, and rebuild with a denser mix, then suggest adjusting the sprinkler heads so it does not happen again.
How do I get an exact price? Send photos and rough dimensions by email or text and we reply with a range the same day. For an exact number we visit, measure, and send a written line-item quote, usually within 48 hours.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Licensed Florida general contractor CGC1540699. Serving Broward and Palm Beach counties.
Permits and compliance handled. J. Perry & Sons pulls the permit, schedules the inspections, and builds to the city and county codes that apply — Broward and Palm Beach municipal building departments, HVHZ requirements where they apply, and HOA/condo association rules. Licensed Florida general contractor CGC1540699.
Free Estimate
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com with project photos, the city, approximate dimensions, and material selections.