Deck Builders in Pompano Beach, FL — Composite, PVC & Pressure-Treated
Canal, pool and beach-side decks for Pompano Beach, built with stainless hardware and permits.
Pompano Beach is a working waterfront town with a lot of canal homes, a growing stretch of beach condos and whole neighborhoods of 1960s–70s ranches inland, and the deck that fits each one is different. On the canals the job is about salt, fasteners and the seawall line; inland it is about replacing a tired wood deck with something that will not rot again. J. Perry & Sons builds composite, PVC and pressure-treated decks across the city and pulls the Building Inspections permit as your renovation contractor in Pompano Beach.
Deck Building Cost in Pompano Beach
| Scope | Typical size | Installed range |
|---|---|---|
| Pressure-treated pine deck | 200–400 sf | $35–$55/sf |
| Composite deck (capped, hidden fasteners) | 200–450 sf | $55–$85/sf |
| PVC deck (full-synthetic boards) | 200–450 sf | $65–$95/sf |
| Rooftop or elevated deck | 150–500 sf | $90–$140/sf |
| Deck resurfacing (new boards on a sound frame) | 200–400 sf | $18–$35/sf |
| Stairs, benches, pergola, seawall steps | per item | By quote |
Canal and beach-side decks price toward the top of each range because of 316 stainless hardware and higher-retention pressure-treated framing. Aluminum or glass railing comes from our railing partner and is quoted as a separate line.
Free Estimate
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com with project photos, the city, approximate dimensions, and material selections.
Pompano Beach homes and what that means for deck building
East of Federal Highway, Pompano has 1950s–70s CBS canal homes along the finger canals off the Intracoastal, many with pools, docks and seawalls. The beach has 1960s–80s condos and a wave of newer towers. West of Federal and out past I-95 are 1960s–80s slab-on-grade ranches in neighborhoods like Cypress Lakes and Palm Aire, and 1990s–2000s gated communities with HOAs along the city's western edge.
Canal decks sit in the splash zone. We build them with UC4B ground-contact pressure-treated posts and beams, 316 stainless hangers, straps and screws, and we hold the frame a few inches off the seawall cap so salt water drains and the cap stays visible for inspection. The deck stops at the landward edge of the seawall; anything over the water is a dock structure with a separate permit path. Many Pompano canal homeowners pair a composite deck with seawall steps down to a floating dock, and we build the steps as part of the deck when they stay landward.
Inland ranches commonly have 1980s–90s wood decks with posts buried in soil and rusted hangers. Pompano has strong subterranean termite pressure, so we remove the old frame completely, treat the soil, pour piers with post bases above grade, and use ground-contact lumber with treated cut ends. Resurfacing is only offered when the existing frame passes a probe and hardware check.
Broward's HVHZ rules mean the Pompano Beach Building Inspections division wants engineered drawings with uplift connectors and footing details on every deck. Footings in the sandy soil are typically 12–24 inches. Beach condo rooftop decks need the association's approval and a structural letter and are built on pedestals with no membrane penetrations.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Send a photo of the yard, canal edge or roof and rough dimensions and we'll reply with a same-day range.
How we do it in Pompano Beach
- Site walk and survey check. Seawall line, setbacks, pool barrier, dock location and where the deck will meet pavers or coping.
- Board selection. Capped composite for most canal and pool decks; PVC where the deck bakes in afternoon sun; pressure-treated for shaded inland yards on a budget.
- Engineering and permit. Stamped framing plan and connector schedule filed with Building Inspections; HOA or condo submittal handled with you.
- Removal and treatment. Old wood decks demolished to the soil or slab, debris hauled, ground treated.
- Footings and stainless frame. Piers with stainless post bases on canal lots, galvanized inland; joists at 12 or 16 inches on center with uplift straps.
- Decking, seawall steps, fascia. Hidden clips, picture-frame border, closed-riser steps where the deck drops toward the water.
- Railing and final. Partner installs aluminum or glass railing; we schedule the final inspection and close the permit.
Related services in Pompano Beach
- Pavers in Pompano Beach
- Painting in Pompano Beach
- Stone Veneer in Pompano Beach
- Tile Installation in Pompano Beach
- Kitchen Renovation in Pompano Beach
- Bathroom Renovation in Pompano Beach
- Epoxy Flooring in Pompano Beach
Nearby service areas
- Deck Building in Fort Lauderdale
- Deck Building in Tamarac
- Deck Building in Parkland
- Deck Building in Davie
- Deck Building in Hollywood
Planning guides: Composite vs Pressure-Treated Deck Cost in South Florida · Deck Permits in South Florida · Backyard Expansion Cost
Deck Building in Pompano Beach — FAQ
Can you build steps from my deck down to the dock? Yes, as long as the steps stay landward of the seawall cap. If the design needs to go over the water, that portion becomes a dock structure and is permitted separately.
What does the Pompano Beach permit involve? Engineered drawings showing framing, uplift connectors and footings, filed with the Building Inspections division, then a framing and a final inspection. We handle all of it, including any HOA or condo paperwork.
Why not just use galvanized hardware on a canal deck? Galvanized coatings fail quickly in salt spray, and a rusted hanger is a structural problem, not a cosmetic one. On canal lots we use 316 stainless for every hanger, strap and screw.
How long does a Pompano deck take? Permit review runs about three to five weeks; a 300 sf ground deck builds in one to two weeks, rooftop decks in two to four. Dry-season starts from November through April avoid rain delays.
How do I get an exact price? Call (561) 556-7509 or email jperrysonsgc@gmail.com with a photo and rough dimensions. We reply with a range the same day and schedule a site visit for a firm written quote.
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com. Licensed Florida general contractor CGC1540699. Serving Broward and Palm Beach counties.
Permits and compliance handled. J. Perry & Sons pulls the permit, schedules the inspections, and builds to the city and county codes that apply — Broward and Palm Beach municipal building departments, HVHZ requirements where they apply, and HOA/condo association rules. Licensed Florida general contractor CGC1540699.
Free Estimate
Free estimate — call (561) 556-7509 or email jperrysonsgc@gmail.com with project photos, the city, approximate dimensions, and material selections.